© 2009 IDS Imaging Development Systems GmbH 165
9 Specifications
9.2.3 USB uEye LE
Housing Version
Figure 132: USB uEye LE
Enclosure protection class
32 g (with housing)
12 g (S-mount)
8 g (PCB only)
For the dimensions of the USB uEye LE accessories, please refer to the USB uEye LE
Accessories chapter.
Differences to the USB uEye SE
The USB uEye LE features the following differences to the USB uEye SE models:
· Version with housing: CS-mount (C-mount lenses can be connected using the enclosed adapter,
see USB uEye LE Accessories).
· Version with housing: No I/O connector.
· Board level version: Optional I/O connector with all signals.
· Board level version: No opto couplers for the I/Os.
· Board level version: Hardware supports triggering on falling edges only.
· Board level version: Single color LED (orange) that indicates power-on status.
The following sensor/lens combinations are available:
CS-mount
with housing:
UI-1xx5LE-x
without housing
without lens holder:
UI-1xx8LE-x
To Next Page
Loading...
Need help?
General