IDS uEye series User Manual

© 2009 IDS Imaging Development Systems GmbH 191
9 Specifications
Digital output wiring
The following figures show examples of how the digital output is wired.
Figure 172: Wiring of the digital output as an open collector output (rev. 1.2)
Figure 173: Wiring of the digital output as an open emitter output (rev. 1.2)
Figure 174: Wiring of the digital output as an open collector output (rev. 2.0)

IDS uEye series Specifications

General

Sensor	CMOS
Interface	USB 2.0, USB 3.0, GigE
Shutter	Global or Rolling Shutter
Power Supply	Via USB or external power (depending on model)
Operating System	Windows, Linux
Mount	C-mount or CS-mount
Dimensions	29 x 29 x 29 mm