IDS uEye series User Manual

Content
Freerun Mode 6.1.1
Trigger Mode 6.1.2
Standby 6.1.3
Applying New Parameters 6.1.4
Image Display Modes 6.1.5
6.2 Sensor
28
Sensor Sizes 6.2.1
Fill Factors 6.2.2
Color Filter (Bayer Filter) 6.2.3
Shutter Methods 6.2.4
6.3 Camera Parameters
33
Pixel Clock, Frame Rate, Exposure Time 6.3.1
Gain and Offset 6.3.2
Automatic Image Control 6.3.3
6.4 Reading out Partial Images
36
Area of Interest (AOI) 6.4.1
Binning 6.4.2
Subsampling 6.4.3
6.5 Digital Input/Output
38
Digital Input (Trigger) 6.5.1
Digital Output (Flash Strobe) 6.5.2
General Purpose I/O 6.5.3
Serial Interface (RS232) 6.5.4
7
Installation 40
7.1 Downloading the Software
40
7.2 Installing the uEye Drivers
41
7.3 Uninstalling the uEye Drivers
42
7.4 Connecting a USB uEye Camera
43
7.5 Connecting a GigE uEye Camera
45
Important Notes 7.5.1
Serial Interface (RS232) 7.5.2
Camera Start-up 7.5.3
Camera Initialization 7.5.4
Camera Recognition 7.5.5

IDS uEye series Specifications

General

Sensor	CMOS
Interface	USB 2.0, USB 3.0, GigE
Shutter	Global or Rolling Shutter
Power Supply	Via USB or external power (depending on model)
Operating System	Windows, Linux
Mount	C-mount or CS-mount
Dimensions	29 x 29 x 29 mm