IDS uEye series User Manual

© 2009 IDS Imaging Development Systems GmbH44
User Manual uEye Cameras V3.32
Figure 44: Connected uEye cameras are listed in the uEye
Camera Manage
If the camera is not listed in the uEye Camera Manager, open the Windows Device
Manager to check whether the camera has been correctly recognized. If recognition was
successful, you will find an entry in the format “uEye UI-xxxx-xx Series” under “Universal
Serial Bus Controllers.” A question mark or exclamation mark before the entry indicates
that camera was not correctly recognized. Disconnect and reconnect the camera. The
camera should now be correctly recognized.

IDS uEye series Specifications

General

Sensor	CMOS
Interface	USB 2.0, USB 3.0, GigE
Shutter	Global or Rolling Shutter
Power Supply	Via USB or external power (depending on model)
Operating System	Windows, Linux
Mount	C-mount or CS-mount
Dimensions	29 x 29 x 29 mm