AFL-08B-N270 User Manual
Page 23
WARNING:
When installing the AFL-08B-N270, make sure to:
Turn the power off: Chance of electrocution. Turn off the monitor and
unplug it from the power supply.
Only let certified engineers change the hardware settings: Incorrect
settings can cause irreparable damage to the product.
Install the monitor with assistance: The product is very heavy and may be
damaged by drops and bumps. Two or more people should install the panel
PC.
Take anti-static precautions: Electrostatic discharge can destroy electrical
components and injure the user. Users must ground themselves using an
anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1: Unpack the panel PC
Step 2: Check all the required parts are included
Step 3: Install the CompactFlash® card
Step 4: Mount the panel PC
Step 5: Connect peripheral devices to the bottom panel of the panel PC
Step 6: Connect the power cable
Step 7: Configure the system Step 0:
To Next Page
Loading...
Need help?
General
