IEI Technology AFL-08B-N270 User Manual

AFL-08B-N270 User Manual
Page 24
2.1 Unpack the Panel PC
To unpack the panel PC, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during installation
process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the monitor out of the boxes.
Step 6: Remove the peripheral parts box from the main box.
2.1.1 Packing List
The AFL-08B-N270 panel PC is shipped with the following components:
Quantity Item Image
1 AFL-08B-N270 panel PC
1 Power adapter
(P/N: 63000-FSP036RAB608-RS)

IEI Technology AFL-08B-N270 Specifications

General

Brand	IEI Technology
Model	AFL-08B-N270
Category	Touch Panel
Language	English