SmartPLC SafeLine AC4S with fieldbus interfaces
Diagnostic information
43296
The logical device creates diagnostic codes. They reflect the active internal state of the evaluation
logic (state machine). The diagnostic codes can be read with the following FB: → CtrlASi_InSlave
(→ S. 188).
Following diagnostic codes exist:
State for going through the start-up test
Both channels = TRUE, check the set timer
Both channels = FALSE, check the set timer
1 channel = TRUE, test of the synchronisation time
1 channel = TRUE, synchronisation time elapsed
1 channel = TRUE; tolerance time not yet elapsed
To Next Page
Loading...
