Draco compact DVI KVM Extender
38 2021-07-09
The 'Hot Key' sequence to enter Command Mode can be changed. The
following table lists the 'Hot Key' Codes for the available key sequences:
'Hot Key' Code 'Hot Key'
0 Freely selectable (2012-01-12)
2 2x <Scroll>
3 2x <Left Shift>
4 2x <Left Ctrl>
5 2x <Left Alt>
6 2x <Right Shift>
7 2x <Right Ctrl>
8 2x <Right Alt>
Set freely selectable 'Hot Key' (exemplary)
In order to set a freely selectable 'Hot Key' (e.g. 2x <Space>), use the
following keyboard sequence:
<current 'Hot Key'>, <c>, <0>, <Space>, <Enter>
Reset 'Hot Key'
In order to set a 'Hot Key' back to default settings, press the key
combination <Right Shift> + <Del> within 5 s after plugging in a keyboard.
Pos: 32 /806-IHS E/Konfiguration/USB -HID-Ghos ting /K477_USB-HID-Ghosting @ 9\mod_1362404683 851_6.doc @ 71192 @ 2 @ 1
5.4 USB-HID Ghosting
This function allows specific keyboard and mice descriptors (device
descriptions) to be permanently stored in the CPU unit. This eliminates the
need to register and deregister the keyboard and mouse on an operating
system each time there is a shared use of a source (computer, CPU) by
two or more consoles within a KVM matrix.
The following table lists the keyboard commands for the configuration of
USB-HID Ghosting:
To Next Page
Loading...
Need help?
General
