Ihse Draco compact DVI 477 Series User Manual

Configuration
2021-07-09 39
Function
Keyboard Command
Writes the device descriptions of
the input devices connected to the
CON Unit into the CPU Unit.
Activating the emulation in the
CPU Unit.
<'Hot Key'>, <h>, <w>, <Enter>
Activates the emulation of already
stored device descriptions in the
CPU Unit
<'Hot Key'>, <h>, <e>, <Enter>
Deactivates the emulation of
active device descriptions in the
CPU Unit. The input devices
connected to the CON Unit will be
now passed transparently to the
source (computer, CPU).
<'Hot Key', <h>, <d>, <Enter>
Deactivates the emulation of
active device descriptions in the
CPU Unit. Deletes the
descriptions out of the CPU Unit.
The input devices connected to
the CON Unit will be now passed
transparently to the source
(computer, CPU).
<'Hot Key', <h>, <r>, <Enter>
When using a USB combo device as a USB
-
HID input device, switching to
a CPU Unit with activated USB
-HID Ghosting may cause limited
functionality.
Pos: 33 /806-IHSE/ Konfiguration/474_Konf igurations datei/477-xx @ 15\mod_1455542011371 _6.doc @ 166183 @ 2333 @ 1
5.5 Configuration File
The KVM Extender contains a configuration file (Config.txt) to set specific
parameters and to read out device and video information. You can find it
on the flash drive of the KVM Extender. The flash drive can be opened by
a mini USB connection to a computer.
The configuration file can be edited with all common text editors.
After setting a paramet
er, the KVM Extender needs to be restarted.
To ensure correct identification and acceptance of the parameters, the
s
tart command #CFG has to be written into the first line of the Config.txt
file.

Ihse Draco compact DVI 477 Series Specifications

General

Brand	Ihse
Model	Draco compact DVI 477 Series
Category	Extender
Language	English