Platinum™ VX
Installation and Operation Manual System Configuration
© 2016 Imagine Communications Corp. Proprietary and Confidential. Version 1.2 | Page 158
3. A message will be displayed confirming the upgrade and upgrade progress will be displayed on the
right
4. Click the Activate button to activate the new firmware
5. A message will be displayed confirming that firmware activation is in progress. Refresh your browser
after a while.
Note for 8 RU Frames: Upgrading from firmware version 1.0.1
If you are:
Using an 8 RU frame AND
Currently running the first firmware version (1.0.1)
You first need to upgrade to an intermediate version (1.0.3), and then to the latest version. Follow these
steps:
1. In the Web UI, go to the Firmware Foundry. Click the Upgrade button.
2. Browse and select the PVX-RES 1.0.3 firmware package. Click Open.
3. A message will be displayed confirming the upgrade and upgrade progress will be displayed on the
right
4. Once complete, click the Activate button to activate the new firmware
5. A message will be displayed confirming that firmware activation is in progress. Refresh your browser
after a while.
Once the 8 RU frame is running version 1.0.3, you can upgrade to the latest version (1.2)
1. In the Web UI, go to the Firmware Foundry. Click the Upgrade button.
2. Browse and select the PVX-RES 1.2 firmware package. Click Open.
3. A message will be displayed confirming the upgrade and upgrade progress will be displayed on the
right
4. Click the Activate button to activate the new firmware
5. A message will be displayed confirming that firmware activation is in progress. Refresh your browser
after a while.
To Next Page
Loading...