Imagine Platinum VX - Optical Sfps

Platinum™ VX
Installation and Operation Manual Platinum VX Specifications and Power
© 2016 Imagine Communications Corp. Proprietary and Confidential. Version 1.2 | Page 73
Optical SFPs
OP+SFP+2ORX+NR Dual Optical Receiver Specifications
The OP+SFP+2ORX+NR is a dual optical receiver SFP designed to receive two SDI signals at up to 2.97
Gb/s over single mode fiber, and to convert optical SDI to electrical SDI, as defined in SMPTE 297-2006.
Table 20: OP+SFP+2ORX+NR Dual Optical Receiver Specifications
Item
Specification
Standards
 3G: SMPTE 424M (2.97, 2.97/1.001 Gb/s)
 HD: SMPTE 292M (1.485, 1.485/1.001 Gb/s)
 SD: SMPTE 259M-C (270Mb/s, 525/625 component video)
 ASI: DVB-ASI 270Mb/s
Wavelength
1150 - 1600 nm
Sensitivity
-19dBm (typical), ER=7dB, 3G pathological
Power Monitoring Accuracy
±3 dB
Maximum Back Reflection
-27 dB
Optical Return Loss
>29 dB
Maximum Input Power
+3 dBm (@1310 nm)
Power Consumption
Typical: 680 mW
OP+SFP+2OTX+13+NR Dual Optical Transmitter Specifications
The OP+SFP+2OTX+13+NR is an dual optical FP (Fabry-Perot) Transmitter, capable of transmitting two
SDI signals up to 2.97 Gb/s over single-mode fiber and converting electrical-to-optical SDI signals, as
defined in SMPTE 297-2006.
Table 21: OP+SFP+2OTX+13+NR Dual Optical Transmitter Specifications
Item
Specification
Standards
 3G: SMPTE 424M (2.97, 2.97/1.001 Gb/s)
 HD: SMPTE 292M (1.485, 1.485/1.001 Gb/s)
 SD: SMPTE 259M-C (270Mb/s, 525/625 component
video)
 ASI: DVB-ASI 270Mb/s
Wavelength
Typical: 1310 nm (1260 - 1360 nm)
Spectral Line Width
Typical: 1.5 nm
Average Optical Output Power
Typical: -2.5 dBm (-6 to 0.5 dBm)
Extinction Ration
7 to 14 dB
Optical Rise/Fall Time
Typical: 70 ps
Power Consumption
Typical: 1080 mW