Imagine Platinum VX - Advanced Settings

Platinum™ VX
Installation and Operation Manual Parameters
© 2016 Imagine Communications Corp. Proprietary and Confidential. Version 1.2 | Page 115
Name
Description
Type
Options
 1080i/59.94
Reference Locked
Indicates whether an external
reference is present and the
genlock circuitry has successfully
locked to it.
RO
 Yes
 No
Proc Channel (1-4) Locked
Confirms whether the processing
signal from the frame sync or line
sync is in a "locked" state
RO
 Free-Run (default)
 Yes
 No
Advanced Setting
Note: This menu contains processing parameters for each input channel. There are two inputs (A and B)
for each CQ switch. When a TAKE action is executed by the switch, A or B becomes the output and the
next TAKE action changes another input to output.
The concept of Program and Preview is applied on the output of the switch. Any setting changes are
applied to input signals before a switch and may or may not affect the current outputs (program or
preview). If an input is the current output, changes to it will be applied to the output signal.
After a system reboot, only the Program output has a guaranteed connection to the source routed prior
to rebooting. The Preview may connect with the same source as the Program output.
Table 44: Advanced Setting
Name
Description
Type
Options
Audio Control Style
Use to switch between Mono and
Stereo modes
RW
 Mono
 Stereo
Audio V-Fade
Enables an audio V-fade (clean
audio hotswitch).
RW
 Enable
 Disable
Fade Time
Set the global audio fade rate
RW
0 seconds to 1 second
CQS 1/2 (Advanced)
Table 45: CQS 1/2 (Advanced)
Name
Description
Type
Options
Frame Sync Output Standard
Set Frame Sync's output format
RW
 Follow Input Standard
 525
 625
 720p/50
 720p/59.94
 1080i/50
 1080i/59.94
 1080p/50
 1080p/59.94