iNetVu 7000 Series - Page 92

C-COM Satellite Systems Inc. Page 92 of 164
 Skew Adjusting
Polarization adjustment to adjust the polarization axis for any vehicle inclination.
The Azimuth Axis will rotate 90º on both sides of the peaked azimuth angle, then
return to the satellite position, and adjust the polarization axes to compensate for
any recognized mount inclination.
 Manual Operation
Manually controlled movement via Controls menu has been detected.
 Mount Testing
System test or demo being performed via System Test and Demo menu.
 Peaking on Satellite
System makes minor adjustments in positioning in order to receive optimal Signal
Strength.
 AZ Calibration
Azimuth Calibration is being performed.
 PL Calibration
Polarization Calibration is being performed.
 CP Calibration
Compass Calibration is being performed.
 Positioning
An automatic movement command has been initiated (i.e. Find Satellite or
Deploy Antenna) and the antenna is moving into the designated position.
 Searching Satellite
Antenna is performing a search pattern to locate the satellite.
 Stowing Antenna
Antenna is being stowed.
 Unknown Status
Satellite Modem Communication Status
Indicates the Transmitter status and displays any issues in communication with the
Satellite Modem
 Modem TX Enabled
Indicates that the transmitter has been enabled.
 Modem TX Disabled
Indicates that the transmitter has not been enabled.
 No Modem Communication
The controller is trying to establish communication with the modem and or
No power is applied to the modem.
GPS Status
Displays condition of the GPS signal
 GPS Normal
GPS signal is being received from the GPS Antenna.
 GPS Failed
GPS signal is not being received from the GPS Antenna.
 GPS Override
GPS coordinates have been manually overridden from the Maintenance menu.