48    tirb45e1 (2019-02) CDGxxxDxx.cp 
 
 
 
Bit 0 
Bit 1…13 
Bit 14 
Not at temperature 
0 
Low Warning Exception 
 
 
Bit 0 
Bit 1 
Bit 2 
Bit 3…13 
Bit 14 
Diaphragm Failure 
Electronics Failure 
Electronics Over Temperature 
0 
Low Error Exception 
 
 
 
  0x02  REAL  x  RO    Highest Informational 
  0x03  REAL  x  RO    Highest Precision 
  0x04  REAL  x  RO    Lowest Precision 
 
 
Accumulated Zero Offset: An amount added prior to Gain to derive Value. Result of 
Zero Adjust Command (accumulated value). 
 
 
Highest Informational Measurement Value: Highest value that the gauge can 
measure without a specified accuracy. 
 
 
Highest Precision Measurement Value: Highest valid value at which the gauge is 
specified with an accuracy value. Above that value, the parameter Reading Valid is 
set to invalid. 
 
 
Lowest Precision Measurement Value: Lowest valid value at which the gauge is 
specified with an accuracy value. Below that value, the parameter Reading Valid is 
set to invalid. 
 
 
 
 
 
 
 
Bit 0 
Sensor Failure Piezo Sensor 
 
 
5.6.2  Information Capacitance 
5.6.3  Information Common 
Subindex 0x01