tirb45e1  (2019-02) CDGxxxDxx.cp    55 
 
Local controller time corresponding to the input latch time in microseconds. It starts 
at zero on device power-up.  Mandatory if device has inputs. If device has no 
inputs defined, this corresponds the time immediately prior to writing to input SM. 
 
 
Local controller time corresponding to the input latch time in microseconds. It starts 
at zero on device power-up.  Mandatory if device has inputs. If device has no 
inputs defined, this corresponds the time immediately prior to writing to input SM. 
 
 
 
 
 
Unit of the Value of the Analog Input Sensor Instance and all related parameters. 
 
0x00220000 
0xFD4E0000 
Pascal 
mbar 
If this value is changed, also Subindex 2 will change the value accordingly. 
 
Data Unit for Input Sensor as Enum to have a list of possible values. 
 
Data Units 
0x01(Pa) 
0x04(mBar) 
Pascal 
mbar 
If this value is changed, also Subindex 1 will change the value accordingly.