Inficon CDG045D2 - Appendix; A: Overview Setting Trip Points

62 tirb45e1 (2019-02) CDGxxxDxx.cp
Appendix
Index Object
Code
Sub
Index
Data
Type
Ac-
cess
B/S PM Name Description
0x6nnx RECORD RO Input Trip Point 1 / 2
Trip Point 1 / Trip Point 2
E = Trip Point 1
F = Trip Point 2
0x600E
0x600F
0x01 BOOL RO tx Status High Trip
0: High Trip not asserted
1: High Trip asserted
0x600E
0x600F
0x02 BOOL RO tx Status Low Trip
0: Low Trip not asserted
1: Low Trip asserted
Trip Point 1
Trip Point 2
CDGxxxD, CDGxxxD2
CDGxxxDhs
→  18
→

42
CDGxxxD, CDGxxxD2
CDGxxxDhs
→  19
→

43
Index Object
Code
Sub
Index
Data
Type
Ac-
cess
B/S PM Name Description
0x8nnx RECORD RO
Configuration Trip
Point 1 / 2
Trip Point 1 / 2
E = Trip Point 1
F = Trip Point 2
0x800E
0x800F
0x01 BOOL RW B/S High Trip enable
High Trip Point
0: disable
1: enable
0x800E
0x800F
0x02 BOOL RW B/S Low Trip enable
Low Trip Point
0: disable
1: enable
0x800E
0x800F
0x11 REAL RW B/S High Trip Point Limit
High limit to trigger trip point condition, if Input
Value (I 0x9nnE, SI 0x01) is above this limit.
0x800E
0x800F
0x12 UDINT RW B/S High Trip Source Index
Object index of High Trip Point Value source.
Bit 16…31: Index
Bit 08…15: Subindex
Bit 00…07: reserved
It is possible to reference to "High Trip Point
Limit" (I 0x800E1100 / I 0x800F1100) or any
other
available input source from another sensor
(in case of combi / multigauges).
0x800E
0x800F
0x13 REAL RW B/S
Percentage High Trip
Source
Percentage of value referenced by High Trip
Source Index (I 0x8nnE, SI 0x12) in %.
0x800E
0x800F
0x14 REAL RW B/S Low Trip Point Limit
Low limit to trigger trip point condition, if Input
Value (I 0x9nnE, SI 0x01) is below this limit.
(continued)
A: Overview Setting Trip
Points
Input Data Trip Point
Trip Point Configuration