Inficon Transpector XPR 3+ User Manual

2 - 9
Transpector XPR 3+ Operating Manual
4 If the host computer is connected to Transpector XPR 3+ through the Ethernet
port of the computer, right-click Local Area Connection and select
Properties. See Figure 2-7.
Figure 2-7 Changing adapter settings
5 Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
See Figure 2-8.
Figure 2-8 TCP/IPv4
6 In the TCP/IPv4 properties menu, select Use the following IP address.
See Figure 2-9.
Figure 2-9 Use the following IP address

Inficon Transpector XPR 3+ Specifications

General

Brand	Inficon
Model	Transpector XPR 3+
Category	Measuring Instruments
Language	English