Infinite DVX Plus Mach I - Account Codes; Using Account Codes

Account Codes 1
ABOUT THIS USER GUIDE
…
FLEXIBLE BUTTONS -- Most of the features described in this
user guide may be set up on a flexible button for one-button
access. (Refer to
“Flexible Button Programming” on page 34.
)
For certain features to operate properly, a flexible
button MUST be pre-programmed. A “Flex Btn”
symbol has been used to indicate those features.
FLEXIBLE NUMBERING -- This feature allows the system
numbering plan to be modified, as well as the length of the
feature access codes (2-4 digits). This user guide describes the
following features using the system default codes (3-digits).
Consult with your system administrator if you have questions
regarding the numbering plan for your system.
Account Codes
Using Account Codes
When connected to an outside line call:
1. Pres s the pre-programmed ACCOUNT CODE flexible
button.
2. Dial the account code up to 12 digits (the other party will
not hear the digits being dialed).

If account code is less than 12 digits, an asterisk [
6
]
must be entered to return to the call.

If account codes are forced, the account code must
be entered prio r to d ialing the outside nu mber.
❑
Flex
Btn
❑
Flex
Btn