56 Speed Dial
Last Number Redial
1. Press the SPEED button.
2. Press the pound [#] key. The last number dialed over an
outsid e line w ill be automatically redialed.
Save Number Redial
If you wish to save the last number you dialed:
1. After placing an outside call, keep handset off-hook.
2. Press the SPEED button twice.
Storing Speed Numbers
Station Speed numbers can be en tered by keyset users. System
Speed numb ers mu st be entered b y the first p rogrammed
attendant. If an attendant has not been specified, enter at
Station 100.
1. Press the SPEED button once.
2. Press a desired outside line key, or press the SPEED
button a second time, to select an outside line.
3. Dial th e speed bin loca tion.
000 to 019 = Station Speed numbers
020 to 999 = System Speed numbers
4. Dial telephone number, including special codes buttons as
listed in th e f ollowing :
TRANS - Pulse-to-Tone Switchover
HOLD - Pause
FLASH - Flash
5. Press the SPEED button.
6. Replace the handset or press the ON/OFF button to end
speed dial programming.
For Display Security, press the TRANS button, then
enter the telephone number and any other special
c odes b uttons as need ed.
To Next Page
Loading...