4 Attendant Features
Attendant Features
If your station is designated as the attendant station, the
following features are available to assist you in efficiently
operating your telephone.
911 Feature (Attendant Alert)
When enabled, and a flexible button has been programmed
(programming code = 608), the 911 Alert feature affects a
flashing flexible button and audible tone to notify the
Attendant of a 911 call in progress.
When a 911 call is being made from a user station, the 911
ALERT flexible button rapidly flashes on the Attendant station,
and an audible tone emits from the Attendant’s speaker. The
display shows:
To turn off the alert:
Press the 911 ALERT flexible button.
The display and alert continues until this occurs, then the
display returns to n ormal, and the audible alarm ceases.
The LED continues to flash until all 911 calls are viewed. If
there is more than one 911 call logged, press the 911
ALERT button to advance to view each call in the log.
Once all calls have been reviewed, the 911 ALERT flexible
button will light solid red. All 911 calls are logged on the
Attenda nt station until th ey are deleted.
E911 CALL STA XXXX
MMM DD YY HH:MM am
❑
Flex
Btn
To Next Page
Loading...