18 Call Forwarding
4. Dial th e appropriate forwarding condition code:
[6] = All
[7] = No Answer
[8] = Busy
[9] = Busy/No Answer
5. Dial the three-digit destination number where calls are to
be forward. ( Station, Voice Mail, ACD/UCD groups, or
Hunt group. A confirmation tone sounds. Five seconds
later a dial tone is received.
To remove Follow-Me Call Forwarding from an off-site
location:
1. Dial into the system on a DISA trunk. Enter the DISA
access code, if applicable.
2. Dial the Follow-Me Forward code [642].
3. Dial the station number of the station that forwarding is
to be cancelled.
4. Dial [6] (regardless of the forwarding condition).
5. Dial the station number again. A confirmation tone
sounds. Five seconds later a dial tone is received.
Forward Override
This feature allows you to reach a busy station that is busy
forwarded to a destination. This allows you to Camp-On,
Executive Override, or Leave Messages at the busy station
ra ther th an forwarding to the busy destina tion.
Dial [5#], followed by the desired extension number.
No Answer
If you have been given the ability to forward your calls:
1. Lift the handset or press the ON/OFF button.
2. Dial th e FWD code [640] or press the FWD bu tton.
3. Dial the Call Forward No Answer code [7].
To Next Page
Loading...