CO Ring Tones 27
CO Ring Tones
The ring tone signal used to notify stations of an incoming call
can be changed by each station user to provide distinctive
ringing among a group of stations.
To select a distinctive ring tone for a station:
1. Dial progra m code [695]. The display shows :
2. Enter two-digit tone number from 00 to 36 (as shown in
“CO Ring Tone Table”). The speaker soun ds a steady tone
tha t correlates to the two-d igit entry.
ENTER RING TONES 00-36
XX PRESS SPEED TO SAVE
CO RING TONE*/FREQUENCY
Tone (#) Freq Tone (#) Freq Tone (#) Freq
00 697/770 13 770/1633 26 1209/1336
01 697/852 14 770/0 27 1209/1477
02 697/941 15 852/941 28 1209/1633
03 697/1209 16 852/1209 29 1209/0
04 697/1336 17 852/1336 30 1336/1477
05 697/1477 18 852/1477 31 1336/1633
06 697/1633 19 852/1633 32 1336/0
07 697/0 20 852/0 33 1477/1633
08 770/852 21 941/1209 34 1477/0
09 770/941 22 941/1336 35 1633/0
10 770/1209 23 941/1477 36 OFF
11 770/1336 24 941/1633
Tone Duration* =
50 ms/50 ms
12 770/1477 25 941/0
To Next Page
Loading...