2 Answering Machine Emulation
Verified Account Codes
To enter an account code prior to a CO call:
1. Pres s the pre-programmed ACCOUNT CODE flexible
button before accessing a CO line.
Dial the account code, up to 12 digits. If the account
code matches a verified account code, an intercom
dial tone will be returned. Otherwise, an error tone
will be received.
If account code is less than 12 digits, an asterisk [
6
]
must b e entered before the CO line can be accessed.
2. Access the outside CO line or dial the LCR code and dial
the desired number.
Answering Machine Emulation
When a call is sent to your voice m ailbox, you can press a pre-
programmed flexible button to listen to the caller leaving the
voice m ail message. If you decide to speak with th e ca ller, y ou
can press the pre-programmed button to be connected to the
cal ler.
Notification Methods
There are two methods of notification, a Ring Mode or a
Speaker Mode. These methods are controlled by the type of
flexible button assigned on the telephone.
The pre-programmed button type (654+0=Ring Mode,
654+1=Spkr Mode) defines the operation mode. An incoming
CO call rings at a station and forwards (except busy type) to the
station’s VM mailbox.
❑
Flex
Btn
❑
Flex
Btn
To Next Page
Loading...