22 Call Transfer
2. Press the PICK-UP flexible button to answer the call.
Group Pickup
When intercom tone ringing, transferred outside line ringing,
recall ringing, or initially ringing call is heard at an unattended
telephone:
1. Lift the handset or press the ON/OFF button.
2. Dial [#0], or press the PICK-UP flexible button to be
connected to the calling party.
Call Transfer
Outside lines can be transferred from one phone to another
within the system. The transfer can be either screened
(announ ced) or unscreened to eith er an idle or busy station , or
an ACD/UCD Gro up or Hunt Group.
Answering a Screened Transfer
Your intercom will be signaling accordin g to the intercom
signal switch position.
1. Answer the intercom and receive the transfer notice.
2. Press OUTSIDE LINE or flashin g LOOP button on hold.
You MUST have access to the specific outside line or a
LOOP button to do a directed call pickup.
You must be in the same Pickup group as the ringing
telephone to pickup the call.
You MUST have access to the specific outside line or
LOOP button to use Group Call Pickup.
If the D irect Transfer featu re is en abl ed, th e screen ed
transfer will go direc tly t o the handset. Y ou do n ot ha ve
to press a LINE or LOOP button to answer.
To Next Page
Loading...