14 Call Back
To deactivate Background Music:
1. Dial [632] a gain or pres s the BGM flexible button.
2. Enter a [0]. A confirmation tone sounds and the music
discontinues.
Call Back
If you dial a telephone number that is busy and you want to
leave a Call Back ind ication:
1. Pres s the pre-programmed CALL BACK flexible button.
2. Replace handset or press ON/OFF button . When busy
station hangs up, you are signaled.
3. Answer the call; the station you called will then be
signaled. (If your station is busy when signaled, an
automatic MSG will be placed at your phone.) Only one
Call Back request can be left at a station; the second
request will leave a message wait callback request.
Call Coverage
To program a Call Coverage flexible button on a station:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial [646] for Ringing or [647] for Non-Ringing, followed
by the extension number to be covered. A confirmation
tone sounds. If an error was made during entry, an error
tone sounds.
W hen th e Automat ic Cal l Back Timer is e nab led , a ca ll
back r equest is autom atically invoked anytime you
listen to a busy intercom tone for a preset period of
time.
❑
Flex
Btn
❑
Flex
Btn
To Next Page
Loading...