Ca ll Forwa rding 15
When a call rings in (and a flexible button has been assigned):
The coverage station hears ringing for the coverage
station after a five-second delay.
A message is displayed on the Coverage Station LCD as
shown.
The coverage station then presses their flashing
Coverage flexible button, or presses the ON/OFF button,
or lifts the handset if PLA is enabled. The flash rate is the
same as the incoming line ringing rate.
When the call is answered, it ceases to ring at any other
station that has the same coverage appearance. The LCD
of the coverage station displays as shown.
Call Forwarding
All Calls
If you have been given the ability to forward your calls:
1. Lift the handset or press the ON/OFF button.
2. Dial the FWD code [640] or press the FWD bu tton, then
dial [6].
3. Pres s the pre-programmed DSS button, or dial the
intercom nu mber wh ere ca lls are to be forwarded.
CALL FOR STA XXX
MMM DD YY HH:MM am
CALL FOR STA XXX
FROM STA XXX HH:MM am
To Next Page
Loading...