Infinite DVX Plus Mach I - Disable Outgoing CO Access

6 Attendant Features

After the first programmed Attendant presses the
UNAVAILABLE flexible button, or dials the Attendant
Unavailable code [607]:
-The LED on the pre-programmed flexible button lights
solid.
- Recalls and dial “0” calls that were ringing at the first
Attendant station now ring at the secon d Attenda nt.
-If the secon d Atte ndan t pla ces their p hone in
unavailable mod e, the third Attenda nt receives reca ll
and dial “0” calls.

When the fir st Attenda nt presses the UN AVAILABLE
flexible button again or dials the Attendant Unavailable
code [607] again:
-The LED on the pre-programmed flexib le button
extinguishes.
-The first Attendant resumes normal operation.
-The second Attendant will not receive recalls or dial
“0” calls.
Disable Outgoing CO Access
The attendan t station can disab le CO lines, to p reven t outgoing
CO calls.
1. Lift the handset or press the ON/OFF button.
2. Dial [602]. A confirmation tone sounds.
3. Depress the line button(s) of the CO Line(s) to be
disabled. A confirmation tone sounds; the CO LINE
button(s) LED flashes.
4. Repeat the steps for disabling to re-activate the CO
Line(s).