32 Do Not Disturb
3. Di al a n [
6
] to scroll up (nex t entry) through the lis t, or dial
a [#] to scroll down (previous entry) through the list, or
press another button to view the list f or a different letter
of the alphabet.
4. Press the SPEED button when the desired name is shown
on the LC D dis pla y. (Sys tem automa tically dials the
destination station or outside phone number.)
Transferring a Call using Directory Dialing
While on a call:
1. Press the TRANS button.
2. Dial the Directory Dial Code [680] or press the
pre-programmed DIREC TORY DIAL flexib le button.
3. Pres s the digit asso ciated with the pers on’s name, and
when it displays press the SPEED button to automatically
dial the destination station.
4. Hang up to complete the transfer.
Do Not Disturb
Activating Do Not Disturb
If you are given the ability to place your ph one in Do Not
Disturb (DND):
Pres s the pre-programmed D ND flexib le butto n (DN D
button LED lights steady), or dial [631] on the 8-button
keyset. A confirmation tone sounds.
The DND button can be pressed while phone is ringing,
to stop the ringing (refer to One-Time Do Not Disturb).
Calls may be transferred to internal stations only. An
att empt to transfer a call off- net (via a speed dial bin)
results in the call recalling upon go ing on-hook.
To Next Page
Loading...