26 CO Line Queuing
If you do not have a CAMP-ON button, either:
Go on-hook with present call and Camp-On will ring
through.
-or-
Place outside CO call on hold, then go on-hook. Camp-On
will ring through.
CO Line Queuing
If you see that a particular outside line is busy and you wish to
be placed on a list waiting for that line to become available:
1. Press the desired busy OUTSIDE LINE button or POOL
button. Receive busy tone.
2. Pres s the pre-programmed LINE QUEUE flexible button.
3. Replace the handset or press the ON/OFF button.
To Answer a Queue Call Back
If you hear Queue Call Back ringing, and an outside line for the
LINE GROUP or a LOOP button you queued is rapidly flashing:
1. Lift the handset or press the ON/OFF button.
2. Press the flashing OUTSIDE LINE button or LOOP button
to answer.
A station can queue only one line at a time.
If your station is programmed for Preferred Line
Answer, you will have the line automatically upon
lifting the handset. Then dial the desired number.
❑
Flex
Btn
To Next Page
Loading...