Ca ll Forwa rding 17
Follow-Me
If you have been given the ability to forward your calls:
1. Lift the handset or press the ON/OFF button.
2. Dial the Follow-Me Forward code [642] on the key pad.
3. Dial the station number of the station from which
forwarding is desired.
4. Dial th e appropriate forwarding condition code:
[6] = All
[7] = No Answer
[8] = Busy
[9] = Busy/No Answer
5. Dial the three-digit destination number where calls are to
be forwarded. (Station, Voice Mail, ACD/UCD or Hunt
group. A confirmation tone sounds.
6. Replace the handset or press the ON/OFF button.
To remove Follow-Me Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Dial the Follow-Me Call Forward code [642].
3. Dial the station number of the station that forwarding is
be cancelled.
4. Dial [6] (regardless of the forwarding condition).
5. Redial the same three-digit station number. A
confirmation tone sounds and the FWD button LED
extinguishes.
To enable Follow-Me Call Forwarding from an off-site
location:
1. Dial into the system on a DISA trunk. Enter the DISA
access code, if applicable.
2. Dial the Follow-Me Forward code [642].
3. Dial the station number of the station from which
forwarding is desired.
To Next Page
Loading...