Calling Station Tone Mode 25
Calling Station Tone Mode
The calling station tone mode optio n allows a callin g station to
override a called station’s “H” or “P” intercom button settings.
When placing a call to a station and Tone ringing is desired:
1. Dial [6#].
2. Dial the three-digit station extension or press the DSS
button of desired station. Call tone rings station.
Camp-On
If a station is in DND, only the attendant can Camp-On using
the Attendan t Override fea ture.
If the s ta tion is busy and you wish to alert them to y our call:
Press the CAMP ON button. Called station receives one
burst of ringing. Wait for their respon se.
When the called party answers:
Consult with caller or hang up to transfer the call.
Answering a Camp-On
If you are on a connected call, hear one burst of muted ringing,
and your CAMP-ON button is flashing, you have a call waiting
for you.
To answer:
1. Press the CAMP-ON button. Any outsid e line y ou are
connected to is placed on hold. You may consult with the
station pla cing th e ca ll.
2. Press flashing OUTSIDE LINE button if call is being
transferred.
❑
Flex
Btn
To Next Page
Loading...