10 Attendant Features
3. Press the SPEED button when finished. A confirmation
tone sounds and the display shows the new or changed
name.
4. Pres s H OLD, use [
6
] or [#] to scroll to next entry.
Local Number/Name Translation Table
This method is used to enter names that will be associated to
the Local Number/Name Translation Table only.
To enter, edit, or erase names that appear in Directory List:
Dial the Directory List program code [693]. The HOLD
button illum ina tes. The first entry (000) in the Directory
List is sh ow n on the display phone (refer to “Directory By
List Programming”).
To select a different entry in the Directory List:
1. Enter the three-digit entry number (000-199), or dial [
6
]
to scroll up (next entry) through the list, or dial [#] to scroll
down (previous entry) through the list.
2. Press the TRANS button to select the entry.
To enter a name with a Local Number/Name Translation
Table nu mber entry:
1. Press the TRANS button.
2. Dial th e three-digit Local Number/Na me Tra nslation
Ta ble n umber ( 600-799) that represents the desired
telephone num ber.
3. Press the SPEED button. A confirmation tone sounds and
the entry is stored.
4. Pres s H OLD, use [
6
] or [#] to scroll to next entry.
To enter or change the current name shown on the display:
1. Press the MUTE button.
2. Use the keys on the dial pad to enter the name (up to 24-
characters may be entered). The display updates as the
name is entered (refer to Figure 1: Dial-By-Name Key Pad
Map, and Table 2: Additional Dial-By-Name Characters).
To Next Page
Loading...