Attendant Features 9
The first entry (000) in the Directory List is shown on the
display.
AAA = Directory List entry number (000-199)
XXX = numbers for Station Intercom , System S pee d dial bin,
or Entry in Local Number/Name Translation Table
nnn = Programmed Name (blank if none)
To select a different entry in the Directory List:
1. Enter the three-digit entry number (000-199), or dial [
6
]
to scroll up (next entry) through the list, or dial [#] to scroll
down (previous entry) through the list.
2. Press the TRANS button to select the entry.
To enter the intercom number to associate to the name:
1. Press the TRANS button.
2. Enter the three-digit station intercom number.
3. Pres s the SPEED b utton to save entry. A confirmation tone
sounds, display updates.
4. Pres s H OLD, use [
6
] or [#] to scroll to next entry.
To clear an entry:
1. Dial the Directory List program code [693].
2. Select the desired entry using the preceding procedure.
3. Pres s the FL ASH bu tton.
4. Press the SPEED button. A confirmation tone sounds and
the entry is erased.
To enter or change the current name shown on the display:
1. Press the MUTE button.
2. Enter the name (up to 24 characters may be entered) by
using the keys. The display updates as the name is
entered (refer to
Figure 1: Dial-By-Name Key Pad Map
, and
Table 2 : Additional Di al -By-Name Char act ers
).
DIR LST AAA BIN/ICM: XXX
nnnnnnnnnnnnnnnnnnnnnnn
To Next Page
Loading...