42 Message Waiting
Answering a Meet Me Page
Go to the nearest phone:
Dial [770] or press the pre-programmed MEET ME flexible
button. You will be connected to party that paged you.
Message Waiting
Answering a Message Waiting
If your MSG button LED is flashing at a slow rate, you have a
message waiting for you.
1. Press the flashing MSG button. The station th at left the
message will be signaled with tone ringing.
2. If called station do es not answer, press the MSG button
once to leave message.
Leaving a Message Waiting Indication
If you dial a station that is busy, unattended, or in DND, you can
leave a messa ge waiting indication.
1. Lift the handset or press the ON/OFF button.
2. Dial the desired intercom station. A busy tone or DND
tone is heard.
3. Press the MSG button, the called party’s MSG button will
flash slowly.
4. Replace hand set or p ress th e ON/Off b utton to end ca ll.
The first m essage left will be the first one called.
Up to five (5) messages can be left at any Key Station.
8-button telephones use [623] to assign a MESSAGE
WAITING b utton.
❑
Flex
Btn
To Next Page
Loading...