Multitron - Operating Manual
Setup and Function
20 August 2020 Page 23 of 158
Interior
1 Finned heating element and axial fans (in back
wall, not visible)
2 CO
2
and humidity sensor (optional)
3 Interior lighting (not visible)
4 Pt100 temperature sensor
5 Slide rail
6 Limit stop table pull-out
7 Door heating
8 Stop bar
9 Table
Brief description
The Multitron incubation shaker is used to cultivate micro-organisms
in a laboratory environment. The basic version of the device is fitted
with a shaker drive and a heater. Depending on the version of the
device, it will come with either a 3 mm, 25 mm or 50 mm throw. A
version with an adjustable throw (12.5, 19, 25 and 50 mm) is also
available.
The device can be operated either locally, using the operating panel
on the front of the device, or remotely, using a computer connected
to the device via an Ethernet interface.
1
3
5
6
7
8
9
4
2
To Next Page
Loading...
