Your Terminal Terminal User Guide
14
You should only use approved paper rolls as supplied from
your terminal supplier. Details on how to contact us in order to
order supplies of paper rolls can be found on the contact
sticker found on the underside of your terminal. If appropriate,
you may also find these details on the inside cover of this User
Guide.
Only use approved paper rolls as supplied from your
terminal supplier. Attempting to fit rolls of a different
size may damage your terminal.
Only open the printer cover as shown, do not force the
printer cover.
Terminal Installation
You should set up the terminal in a convenient location close
to a power source and an analogue telephone line.
Firstly identify all parts as shown in the image below.
The terminal uses the “Magic Cable” Unit (2) to manage
connections to the power and the telephone line. The unit has
4 sockets for connections: POWER ( ), RS232 (not used), TEL
( IN), and ETH.
1. Your terminal
2. “Magic Cable”
(attached to terminal)
with install kit (cable
tie, and self-adhesive
support)
3. Telephone Line Lead
4. BT Converter for
Telephone Line Lead
5. UK Power Supply Unit
To Next Page
Loading...
