Ingenico iCT220 - Page 74

Supervisor Functions Terminal User Guide
72
Second Supervisor Menu Screen (Press menu once)
RINGS
Allows the number of rings before the
terminal answers an incoming call to be set.
Can be set between 0 and 10. Do not use this
feature unless instructed to do so by the
terminal Helpdesk.
TIPS
Allows the Gratuity/Tip mode to be switched
on and off. Setting TIPS to ON, sets OP MODE
to LATE.
OP MODE
Allows the setting of when the terminal will
contact the acquirer for authorisation during
the transaction. Gratuity/Tip mode is only
available in LATE mode. Setting OP MODE to
EARLY, sets TIPS to OFF.
CALL-TMS
Immediately sets off a configuration data call
to the Terminal Management System (TMS).
Do not use this feature unless instructed to
do so by the terminal Helpdesk.
Third Supervisor Menu Screen (Press menu twice)
INTL
Allows the international dialling code to be
set. Do not use this feature unless instructed
to do so by the terminal Helpdesk.
SALETYPE
Allows the default transaction type to be set,
so the transaction type will begin as soon as
a card is swiped or inserted from the idle
screen. If REFUND is set then the Supervisor
password check will not be done.
TERMPARAM
Allows the setting of internal terminal
options. Do not use this feature unless
instructed to do so by the terminal Helpdesk.
UPGRADE
Immediately sets off a software upgrade call
to the Terminal Management System (TMS).
Do not use this feature unless instructed to
do so by the terminal Helpdesk.