Ingenico iCT220 User Manual

Supervisor Functions Terminal User Guide
80
INVALID CARD
The card presented is of a type that is not
supported, or is damaged and could not be
read, you should ask for another means of
payment.
EXPIRED CARD
The card presented is expired, you should
ask for another means of payment. If the
card is in date check the date and time on
the terminal.
PREVALID CARD
The card presented is not yet valid, you
should ask for another means of payment. If
the card is in date check the date and time
on the terminal.
SORRY FOR
DELAY…
RETRYING
The terminal is unable to contact the acquirer
due to a communications error. The terminal
will make three dial attempts, if all three
attempts should fail the transaction will be
referred. You should check the phone line,
and contact the terminal Helpdesk if the
problem persists.
PRESS ENTER
TO RETRY
The first two dial attempts have failed,
resolve the issue (eg. ensure that the phone
line is not in use) and press enter to continue
for the third and final dial attempt. You
should check the phone line, and contact the
terminal Helpdesk if the problem persists.
CANNOT CALL
HOST CHECK
PHONE LINE
The terminal is unable to contact the acquirer
due to a communications error after three
dial attempts. You should check the phone
line or network, and contact the terminal
Helpdesk if the problem persists.
MEMORY xx%
FULL DO Z
BALANCE
The terminal’s memory is becoming full and
needs to be cleared. Do a Z Balance to clear
the transaction log. Warning will only show
when 90% full or more. You should perform
the Z Balance at the end of every trading
day. If the problem persists after a successful
Z Balance, please contact the terminal
Helpdesk.

Ingenico iCT220 Specifications

General

Weight	325 g
Display	128 x 64 pixels
Connectivity	Ethernet
Card Readers	Magnetic stripe
Security	PCI PTS 3.x certified
Processor	ARM9 32-bit RISC processor