Integra CUSA Clarity System - Chapter 6 Cleaning and Sterilizing the System; Overview; Detaching System Components

This document contains proprietary and confidential information of Integra LifeSciences Corporation. Integra’s confidential information may not be used, disclosed or reproduced without the prior wrien consent of Integra LifeSciences Corporation.
CUSA® Clarity System Service and Maintenance Manual Page 37 of 117 0645403-2-EN
6.1 Overview
Cleaning and sterilization of the CUSA® Clarity system in accordance with the instructions, safety warnings, safety cautions, and user notes listed in
the Operator’s Manual is essential to the longevity and proper operations of the system. This chapter provides the trained technician or engineer the
capability to properly clean and sterilize the CUSA Clarity system components and accessories.
6.2 Detaching System Components
Aer a surgical procedure, keep or discard components and accessories based on the following table.
Chapter 6 - Cleaning and Sterilizing the System
Keep Discard
Handpiece Nosecone
Contamination Guard Flue
EUTs (with less than 5 uses) Tip Stylet
Torque Base Torque Wrench
Foot switch CUSA Quick Connect™ Cartridge and Tubing Set
Power Cord Aspiration Canister
Sterilization Tray Irrigation Supply
Specimen Trap (if used)
Single Use Tip
Detaching the Handpiece
1. Remove the irrigation tubing from the clip at the base of the handpiece.
Table 6-1 Detachable System Components
2. Remove the handpiece cable from the aspiration tubing clips.