Integra DTR-20.1 User Manual

22
Connecting the AV receiver—Continued
By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you
can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.
The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your other components. Use the following sections as a guide.
Video Connection Formats
Video equipment can be connected to the AV
receiver by using any one of the following
video connection formats: composite video,
component video, or HDMI, the latter offering
the best picture quality.
When choosing a connection format, bear in
mind that the AV receiver doesn’t convert
between formats, so only outputs of the same
format as the input will output the signal.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver by using any of the following audio
connection formats: analog, optical, coaxial, or
HDMI.
When you connect audio equipment to an
HDMI, OPTICAL, or COAXIAL input, you
must assign that input to an input selector (see
pages 38 and 40).
If signals are present at more than one input, the inputs will be selected automatically in the following order of priority:
HDMI, digital, analog.
Connecting Audio and Video Signals to the AV receiver
: Signal Flow
Video
Video
Audio
Speakers (see page 18 for hookup details)
DVD player, etc.
TV, projector,
etc.
Audio
Which Connections Should I Use?
IN
MONITOR OUT
DVD player, etc.
AV receiver
TV, projector, etc.
Component
Video Signal Flow Chart
HDMI
Composite Component
HDMI
Composite
IN
OUT
DVD player, etc.
AV receiver
TV, projector, etc.
Optical Coaxial HDMI
HDMI
Audio Signal Flow Chart
Analog
Analog
*1 Depends on the “AudioTVOut” setting (see page 69)
and Digital Input Setup (see page 40).
And, the audio signal can be output only when the
input video signal is from HDMI IN.
Do not connect the optical or coaxial audio cable
when you want to output the analog audio signal.
DTR-20.1_En_A.book Page 22 Wednesday, April 8, 2009 10:06 PM

Integra DTR-20.1 Specifications

General

Brand	Integra
Model	DTR-20.1
Category	Receiver
Language	English