Integra DTR-20.1 User Manual

86
Controlling Other Components—Continued
By pressing the Remote Mode button that’s been
programmed with the remote control code for your CD
player, you can control your player with the following
buttons.
The [CD] button is preprogrammed with the remote
control code for controlling an Integra/Onkyo CD
player.
For details on entering a remote control code for a
different component, see page 80.
a On/Standby button
Set the component to On or Standby.
b Arrow [q]/[w]/[e]/[r] and Enter buttons*
Used to navigate menus and select items.
c Setup button*
Used to access the Integra/Onkyo CD player’s
settings.
d Playback buttons
Play [1], Pause [3], Stop [2], Fast Reverse
[5], Fast forward [4], Previous [7], and
Next [6].
e Repeat button
Used with the repeat playback function.
f Search button*
Used to locate specific points.
g Number buttons
Used to enter track numbers and times for locating
specific points. The [+10] button works as a +10
button or “--/---” button.
h Display button
Displays information about the current disc or track,
including elapsed time, remaining time, total time,
and so on.
i Muting button (43)
Mutes or unmutes the AV receiver.
j DISC +/– button
Selects discs on a CD changer.
k VOL [q]/[w] button (42)
Adjusts the volume of the AV receiver.
l Random button
Used with the random playback function.
m Play Mode button*
Selects play modes on components with selectable
play modes.
n CLR button
Cancels functions and clears entered numbers.
Notes:
• Buttons marked with an asterisk (*) are not supported
by the RI control.
• With some components, certain buttons may not work
as expected, and some may not work at all.
Controlling a CD Player
i
l
k
m
h
b
c
d
a
j
e
f
n
g
Press the appropriate
Remote Mode button first
DTR-20.1_En_A.book Page 86 Wednesday, April 8, 2009 10:06 PM

Integra DTR-20.1 Specifications

General

Brand	Integra
Model	DTR-20.1
Category	Receiver
Language	English