Integra DTR-20.1 User Manual

71
Advanced Setup—Continued
Network
These settings are for use with home automation
equipment and external controllers.
With this preference, you can protect your settings by
locking the setup menus.
Lock Setup
1
Press the [Receiver] button
followed by the [Setup] button.
2
Use the Up and Down [q]/[w]
buttons to select “8. Lock
Setup”, and then press [Enter].
3
Use the Left and Right [e]/[r]
buttons to select:
When the setup menus are locked, you
cannot change any setting.
Locked:
Setup menus locked.
Unlocked:
Setup menus not locked.
4
Press the [Setup] button.
Setup closes.
Note:
After changing the settings of the “HDMI Ctrl”,
“Power Ctrl”, or “TV Ctrl”, turn off the power to all
connected pieces of equipment and then turn them
on again. Refer to the User’s Manuals for all
connected pieces of equipment.
DTR-20.1_En_A.book Page 71 Wednesday, April 8, 2009 10:06 PM

Integra DTR-20.1 Specifications

General

Brand	Integra
Model	DTR-20.1
Category	Receiver
Language	English