13
Remote Controller
For detailed information, see the pages in parentheses.
a On/Standby button (34)
Sets the AV receiver to On or Standby.
b Remote Mode/Input Selector buttons (42, 51,
82–88)
Selects the remote controller modes and the input
sources.
c Arrow [q]/[w]/[e]/[r] and Enter buttons
Used to select and adjust settings.
d Setup button
Used to change settings.
e Listening Mode buttons (54)
Used to select the listening modes.
f Dimmer button (43)
Adjusts the display brightness.
g Display button (44)
Displays information about the current input source.
h Muting button (43)
Mutes or unmutes the AV receiver.
i VOL [q]/[w] button (42)
Adjusts the volume of the AV receiver regardless of
the currently selected remote controller mode.
j Return button
Returns to the previous display when changing
settings.
k Audio button (72)
Used to change audio settings.
When the “AudioTVOut” setting is set to “On”
(page 69), this button is disabled.
l Sleep button (43)
Used with the Sleep function.
■ Controlling the tuner
To control the AV receiver’s tuner, press the [Tuner] (or
[Receiver]) button.
You can select AM or FM by pressing the [Tuner] button
repeatedly.
1 Arrow [q]/[w] buttons
Used to tune into radio stations.
2 D.TUN button (48)
Selects the Direct tuning mode.
3 Display button (48)
Displays information about the band, frequency,
preset number, and so on.
4 CH +/– button (49)
Selects radio presets.
5 Number buttons (48)
Used to select radio stations directly in the Direct
tuning mode. Also you can select a preset directly.
Note:
An Onkyo cassette recorder connected via u can also
be controlled in Receiver mode (see page 88).
Controlling the AV receiver
To control the AV receiver, press the [Receiver]
button to select Receiver mode.
You can also use the remote controller to control
your DVD/BD player, CD player, and other
components. See page 80 for more details.
h
j
4
5
k
l
g
2
1
3
f
e
d
c
b
a
i
DTR-20.1_En_A.book Page 13 Wednesday, April 8, 2009 10:06 PM
To Next Page
Loading...
