Integra DTR-20.1 User Manual

9
Front & Rear Panels—Continued
The page numbers in parentheses show where you can find the main explanation for each item.
a On/Standby button (34)
Sets the AV receiver to On or Standby.
b Standby indicator (34)
Lights up when the AV receiver is on Standby and
flashes while a signal is being received from the
remote controller.
c Zone 2 indicator (75)
Flashes when Zone 2 is being set. Lights up when
Zone 2 is on.
d [–] & [+] buttons (44)
Used to adjust the tone (bass and treble), and the
tone and balance of Zone 2.
Tone button (44)
Used to select either bass or treble.
e Remote-control sensor (14)
Receives control signals from the remote controller.
f Display
See “Display” on page 10.
g Movie/TV button (54)
Selects the listening modes intended for use with
movies and TV.
h Music button (54)
Selects the listening modes intended for use with
music.
i Game button (54)
Selects the listening modes intended for use with
video games.
j Dimmer button (43)
Adjusts the display brightness.
k Memory button (49)
Used when storing or deleting radio presets.
l Tuning Mode button (47)
Selects the Auto or Manual tuning mode for AM
and FM radio.
m Display button (44)
Displays various information about the currently
selected input source.
n Setup button
Opens and closes the setup menus.
o Tuning, Preset, Arrow, and Enter buttons
When AM or FM is selected, the Tuning [q]/[w]
buttons are used for radio tuning, and the Preset
[e]/[r] buttons are used to select radio presets (see
pages 47, 49). With the setup menus, they work as
arrow buttons and are used to select and set items.
The [Enter] button is also used with the setup
menus.
p Return button
Selects the previously displayed setup menu.
q Master Volume control (42)
Sets the volume of the AV receiver to Min, 1
through 79, or Max.
r Zone 2 and Off buttons (75)
The [Zone 2] button is used to turn on the output of
Zone 2.
The [Off] button is used to turn off the output of
Zone 2.
s Zone 2 Level button (76)
Used when adjusting the volume level of Zone 2.
t Phones jack (44)
This 1/4-inch phone jack is for connecting a
standard pair of stereo headphones for private
listening.
u Input selector buttons (42)
Select the following input sources: DVD/BD,
VCR/DVR, CBL/SAT, Game, TV/Tape, Tuner, CD,
Port.
v Setup Mic (35)
The Audyssey 2EQ™ Room Correction and
Speaker Setup microphone connects here.
DTR-20.1_En_A.book Page 9 Wednesday, April 8, 2009 10:06 PM

Integra DTR-20.1 Specifications

General

Brand	Integra
Model	DTR-20.1
Category	Receiver
Language	English