Using the BIOS Setup Program
71
Main Menu
Main Advanced Security Power Boot Exit
BIOS Version xxxxx10A.86A.xxxx.xxx
Processor Type Intel(R) Pentium(R) 4
Hyper-Threading Technology [Enabled]
Processor Speed X.XX GHz
System Bus Speed XXX MHz
System Memory Speed XXX MHz
Cache RAM XXX KB
Total Memory XXX MB
Memory Mode Dual Channel
Memory Channel A Slot 0 XXX MB (DDRYYY)
Memory Channel A Slot 1 Not Installed
m o
Select Screen
Memory Channel B Slot 0 XXX MB (DDRYYY)
n p
Select Item
Memory Channel B Slot 1 Not Installed Enter
Select f Sub-Menu
F1 General Help
Memory Configuration [Non-ECC] P9 Setup Defaults
Language [English] F10 Save and Exit
System Time [HH.MM.SS] ESC Exit
System Date [DD.MM.YY]
Table 17 describes the Main Menu. This menu reports processor and memory information and is
used to configure the system date and system time.
Table 17. Main Menu
Feature Options Description
BIOS Version No options Displays the version of the BIOS.
Processor Type No options Displays processor type.
Hyper-Threading
Technology
• Enabled (default)
• Disabled
Enables or disables Hyper-Threading
Technology.
Processor Speed No options Displays processor speed.
System Bus Speed No options Displays the system bus speed.
System Memory Speed No options Displays the system memory speed.
Cache RAM No options Displays the size of second-level cache and
whether it is ECC-capable.
Total Memory No options Displays the total amount of RAM.
Memory Mode No options Displays single or dual channel operation.
Language
• English (default)
• Français
Selects the current default language used by the
BIOS.
System Time Hour, minute, and second Specifies the current time.
System Date Month, day, year Specifies the current date.
To Next Page
Loading...
Need help?
General
