Intel Desktop Board D865PERL Product Guide
72
Advanced Menu
Main Advanced Security Power Boot Exit
Setup Warning:
Settin
items on this screen to incorrect values
may cause your system to malfunction!
` PCI Configuration
` Boot Configuration
` Peripheral Configuration
` ATA/IDE Configuration
` Diskette Configuration
` Event Log Configuration
` Video Configuration
m o
Select Screen
` USB Configuration
n p
Select Item
` Chipset Configuration
Enter
Select ` Sub-Menu
` Fan Control Configuration
F1 General Help
` Hardware Monitoring
P9 Setup Defaults
F10 Save and Exit
ESC Exit
Table 18 describes the Advanced Menu. This menu is used to set advanced features that are
available through the chipset.
Table 18. Advanced Menu
Feature Options Description
PCI Configuration No options Configures individual PCI slot’s IRQ priority. When selected,
displays the PCI Configuration submenu.
Boot Configuration No options Configures Plug & Play and the Numlock key, and resets
configuration data. When selected, displays the Boot
Configuration submenu.
Peripheral Configuration No options Configures peripheral ports and devices. When selected,
displays the Peripheral Configuration submenu.
ATA/IDE Configuration No options Specifies type of connected IDE device.
Diskette Configuration No options Configures the floppy drive(s). When selected, displays the
Diskette Configuration submenu.
Event Log Configuration No options Configures event logging. When selected, displays the Event
Log Configuration submenu.
Video Configuration No options Configures video features. When selected, displays the
Video Configuration submenu.
USB Configuration No options Configures USB features. When selected, displays the USB
Configuration submenu.
Chipset Configuration No options Configures chipset features. When selected, displays the
Chipset Configuration submenu.
Fan Control Configuration No options Configures fan control features. When selected, displays the
Fan Control Configuration submenu.
Hardware Monitoring No options Configures hardware monitoring. When selected, displays
the Hardware Monitoring submenu.