Intel Desktop Board D865PERL Product Guide
92
Boot Device Priority Submenu
Main Advanced Security Power Boot Exit
1
st
Boot Device [1
st
FLOPPY DRIVE]
2
nd
Boot Device [xxxxxxxxxxx]
Specifies the boot
sequence from the
available devices.
3
rd
Boot Device [xxxxxxxxxxx]
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
m o
Select Screen
n p
Select Item
Enter
Select ` Sub-Menu
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
The submenu represented in Table 35 is for setting boot devices priority.
Table 35. Boot Device Priority Submenu
Feature
Options Description
1
st
Boot Device
2
nd
Boot Device
3
rd
Boot Device
• Removable Device
• Hard Drive
• ATAPI CD-ROM
• Disabled
Specifies the boot sequence from the available devices. To specify
boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended boot device.
The operating system assigns a drive letter to each boot device in
the order listed. Changing the order of the devices changes the
drive lettering. The default settings for the first through final boot
devices are, respectively listed below. The BIOS supports up to
sixteen total boot devices in any combination of the boot device
types below, with respect to these maximums per type.
• Removable Device (maximum of four).
• Hard Drive (maximum of 12).
• ATAPI CD-ROM (maximum of four).
• A device enclosed in parenthesis has been disabled in the
corresponding type menu.
To Next Page
Loading...
Need help?
General
