Intel D865PERL User Manual

Intel Desktop Board D865PERL Product Guide
84
Chipset Configuration Submenu
Main Advanced Security Power Boot Exit
Chipset Configuration
Setup Warning:
Setting items on this screen to incorrect values
may cause your system to malfunction!
ISA Enable Bit [Enabled]
PCI Latency Timer [32]
IOAPIC Enable [Enabled]
Watchdog Timer [Disabled]
CSA Device [Auto]
m o
Select Screen
Burn-In Mode [Default]
n p
Select Item
Enter
Select ` Sub-Menu
F1 General Help
Extended Configuration [Default] P9 Setup Defaults
Chipset Memory Timing Control F10 Save and Exit
ESC Exit
SDRAM Frequency [Auto]
The submenu shown in Table 28 is used to configure advanced chipset features.
Table 28. Chipset Configuration Submenu
Feature Options Description
ISA Enable Bit • Enabled (default)
• Disabled
Some older expansion devices require this to be
enabled.
PCI Latency Timer • 32 (default)
• 64
• 96
• 128
• 160
• 192
• 224
• 248
Set PCI latency time.
IOAPIC Enable • Enabled (default)
• Disabled
Enables or disables I/O Programmable Interrupt
Controller.
Watchdog Timer • Enabled (default)
• Disabled
Enables or disables Watchdog timer.
CSA Device
No option
Enables or disables Communication Streaming
Architecture interface.
continued

Intel D865PERL Specifications

General

Chipset	Intel 865PE
Socket	Socket 478
Form Factor	ATX
Memory Type	DDR SDRAM
Memory Slots	4
Maximum RAM	4 GB
Expansion Slots	1 x AGP 8x, 5 x PCI
LAN	10/100 Mbps Ethernet
Supported CPU	Intel Pentium 4, Intel Celeron
Storage Interfaces	2 x ATA-100, 2 x SATA
USB Ports	8 x USB 2.0 (4 rear, 4 via headers)
Audio	6-channel AC'97