114 Intel
®
Modular Server System Service Guide
Intel
®
Storage Control Module Actions
The actions available for a selected storage control module are displayed to the right of the
system graphic. For a description of these actions, refer to the following table.
Table 25. Storage Control Module Action Menu
OK
(Primary)(Critical)
This SCM is operational, but the status is critical
because redundancy has been lost in a dual
SCM configuration. This SCM is now the
primary controller for all virtual drives.
Status
(Component
Error)
The SCM is not operational due to an internal
failure or a failed firmware update.
Safe Mode
(Offline)
The SCM is in Safe Mode. The SCM will not
process any I/O requests.
Status (Firmware
Update Pending)
A firmware update is pending for this SCM. For
details, see “Firmware Updates” on page 146.
Health Icon Status Message Meaning
Action Menu Item Description
Reset Enables remote reset of the selected Intel
®
Storage
Control Module.
Expansion Port Enable/Disable server access to the external
expansion port on the selected storage control
module. Additional external storage options are
available to the server via the expansion port.
To Next Page
Need help?
General
