Intel
®
Modular Server System Service Guide 165
Regulated Specified Components
To maintain the UL listing and compliance to other regulatory certifications and/or
declarations, the following regulated components must be used and conditions adhered to.
Interchanging or use of other component will void the UL listing and other product
certifications and approvals.
You can find updated product information for configurations on the Intel Server Builder
Web site at the following URL:
http://channel.intel.com/go/serverbuilder
If you do not have access to Intel’s Web address, contact your local Intel representative.
1. Server Chassis: Base chassis is provided with power supply and fans—UL listed.
2. Server board: You must use an Intel server board—UL recognized.
3. Add-in Boards: Must have a printed wiring board flammability rating of minimum
UL94V-1. Add-in boards containing external power connectors and/or lithium
batteries must be UL recognized or UL listed. Any add-in board containing modem
telecommunication circuitry must be UL listed. In addition, the modem must have the
appropriate telecommunications, safety, and EMC approvals for the region in which it
is sold.
4. Peripheral Storage Devices: Must be UL recognized or UL listed accessory and
TUV or VDE licensed. Maximum power rating of any one device is 19 watts. Total
server configuration is not to exceed the maximum loading conditions of the
power supply.
To Next Page
Loading...
Need help?
General
